Sale!

CA-PET – 1,75ø – 750gr Spool

50,00 39,00 Tax Excluded

Category: SKU: CAPET Tag:

Description

CARBON FIBER PET 3D FILAMENT

With CA-PET you can reproduce objects and devices with superior characteristics in every printer.

100% printable in every printer, 100% satisfaction guarantee.

Best use in office and textile machines, mechanical parts like supports and other. You can aneel them.

No moisture inside CA-PET filaments, warrant of repeatibility.

ADDITIONAL INFORMATION ABOUT CA-PET

In general filaments made with CA PET (pet carbon) can be processed on conventional 3D printer using FDM / FFF technology.
CA PET is a pet carbon fiber reinforced developed for 3D printing and to obtain best results we recommend pre drying the filaments at 120° for 4-6 h. Increase drying time for spools up 1 kg.
Don’t leave the filament stopped inside the nozzle more than 20 min. If that down the temperature under 210°, better stop the thermal control.
Suggested print set merely represent a recommendation for general use . Every printer necessity a specific set , nozzle temp, bed temp, etc .
0.5 mm is the mininum diameter of the nozzle with carbon fibers reinforced.
Carbon fibers are abrasive, we suggest to use a nozzle in hardened or tempered metal, like Widia, or wear resistance internal surface, like ceramics or other.
NO tefloned surface!

CA PET

Additional information

Diameter

1.75ø

Weight

750gr

You may also like…